|
| |
|
| |
|
| |
Pressure Gauge (Dead Weight Tester/Pressure Recorder/Pressure Gauge Accessories) |
| |
|
| |
JTM-4740
 |
|
|
| Gauge Saver |
| |
Specifications:
Gauge saver is known as overload protector or pressure limiting value. It cuts off pressure rises above the desired pressure value being pre-set value, thus preventing failure of pressure gauge and also stops possible damages such as hazardous leakages and explosions etc.
|
|
|
|
| |
|
| |
|
| |
JTM-4750
 |
|
|
| Pressure Snubber |
| |
Specifications:
To save the instruments from getting damaged due to severe line pulsations and pressure surges, to protect the accuracy and to increase the life of the instrument.
Each snubber is supplied with piston of three different diameters. Depending on viscosity of the fluid and amount of the dampening desired, position size should be selected. Snubbers can be used for pressure, vacuum or compound gauges and material should be selected depending on application.
MATERIAL: BRASS / STAINLESS STEEL.
|
|
|
| |
|
| |
|
| |
JTM-4760
 |
|
|
| Pulsation Dumpner |
| |
Specifications:
UNIVERSAL PULSATION DAMPNER SHOULD BE USED WHEN PRESSURE FLUCTUATIONS WHCIH MAKE THE POINTER VIBRATE AND DIFFICULT TO READ.
MATERIAL: BRASS / STAINLESS STEEL |
|
|
| |
|
| |
|
| |
JTM-4730
 |
|
|
| Needle Valve |
| |
Specifications:
NEEDLE VALVES
SS 304 / SS 316 NEEDLE VALVES
SCREWED BONNET SCREWED ENDS
MOC AISI 304 / AISI 316
TRIMS AISI 304 / AISI 316
MFG STD MARCK / 022
TESTING MARCK / 022
HAND WHEEL BAKELITE
ENDS SCREWED TO BSP/ BSPT / NPT SOCKETWELD TO ANSI B 16.11
HYD – TEST PRESSURE BODY : 1100 Psig (77 Kg/Cm2) FOR 300#
SEAT : 800 Psig (56 Kg/Cm2) FOR 300# |
|
|
| |
|
| |
|
